PageList

Sunday 26 June 2016

A bevy of Burda tops

Every winter I never seem to have enough long sleeved tops to wear in the cold weather, and I wonder what I could have possibly worn the previous winter. Funnily enough when summer rolls around I also seem to lack short sleeved tops in my wardrobe and again wonder what goes on in my wardrobe in the intervening season!

Anyway, winter has finally rolled in to Sydney and I decided to make a number of quick and easy knit tops at my sewing weekend away at the end of May to fill the hole in my wardrobe. All Burda of course, since that's what I seem to naturally reach for these days.

First up I made a simple round neck top with an interesting shoulder insert which I have been planning to make for many years after seeing lots of other versions pop up around the blogosphere:


This is Burda 9/2012 #123, which is still available for download despite being several years old:


I used some metallic gold linen that was left over from another project for the shoulder inserts. It is hard to capture the shine of this fabric, but it really makes this top a bit more dressy than your standard round neck tshirt.


I changed the pattern slightly by leaving out the facing and keyhole opening at the back of the neckline, and instead just sewed on a narrow neckband instead. My black cotton jersey from the Remnant Warehouse is stretchy enough that I can get the top over my head despite the non stretchy linen at the shoulder and no opening at the back. The shoulder insert is only on the front of the top anyway, so it was fine:


Next up I made a Burda 02/2013 #127, a raglan tee with gathers at the shoulder that I've made twice before (although one of those is a UFO that will soon be finished):


I've made my version in a thin pink marle textured knit that has been in the stash for a long time. I'll definitely be wearing my version with a bra though, because I don't have the kind of confidence that the Burda model is displaying in the photo above!

The sleeves and body of this top are very long which I knew from my previous versions and yet I forgot about when I cut this pattern out. The body length is fine because it can be tucked in, but those sleeves are somewhat annoying (not annoying enough to fix though).


I also found that the gathers on the front shoulder aren't as gathered as much as the ones on the back - I did gather them between the pattern markings, but if I make this top again I would not spread the gathers out as far along the front as I have on this version:



Finally I made a super simple stripe tshirt from Burda 2/2011 #106:


I bought some lovely jersey fabric from Tessuti in 2014 when they held their Jaywalk competition - I couldn't think of anything imaginative enough to make from it at the time but this is a good use. The fabric is very soft with great recovery and wears very well.


I did change the pattern slightly by sewing a cuff with vertical stripes for a bit of interest but otherwise this is a straight size 34 pattern. Gotta love working with knit fabrics - so much less fitting required than all the woven jackets and dresses I usually work with.

And check out that pattern matching - side seams and shoulder seams! If only there were awards for such achievements, but I guess I'll have to make do with my own satisfaction.


I've got two other long sleeved tops and one UFO recently finished (but not yet photographed) which should see me through this winter - but I'm sure that in a year's time I'll be once again lamenting the lack of warm tops in my wardrobe!



No comments:

Post a Comment